Geovision Ccs Usb Dongle Crack !!EXCLUSIVE!!
Geovision Ccs Usb Dongle Crack ->>->>->> https://urlgoal.com/2tv12D
How to Emulate Geovision CCS USB Dongle
Geovision CCS (Control Center System) is a software that allows you to remotely monitor and control multiple Geovision DVRs and NVRs. However, it requires a USB dongle to run, which can be inconvenient or expensive. In this article, we will show you how to emulate the Geovision CCS USB dongle using some tools and techniques.
Disclaimer: This article is for educational purposes only. We do not condone or encourage any illegal or unethical use of the software or hardware mentioned here. Please respect the intellectual property rights of the developers and manufacturers.
Step 1: Identify the USB Dongle Type
The first step is to identify the type of USB dongle that Geovision CCS uses. According to some sources[^1^] [^3^], Geovision CCS uses a Hardlock dongle, which is a type of hardware-based copy protection device. However, according to other sources[^2^] [^4^], Geovision CCS uses a custom USB dongle with different vendor IDs and product IDs, such as VID_04B4 & PID_2000 or VID_04B4 & PID_2007 or VID_04B4 & PID_1BEC.
To find out the exact type of USB dongle that your Geovision CCS software needs, you can use a tool like USBDeview, which can list all the USB devices connected to your computer and show their details. Alternatively, you can use Device Manager in Windows and look for the USB dongle under Universal Serial Bus controllers or Human Interface Devices.
Step 2: Dump the USB Dongle Data
The next step is to dump the data from the USB dongle to a file that can be used for emulation. Depending on the type of USB dongle that you have, you may need different tools and methods to do this.
If you have a Hardlock dongle, you can use a tool like HL-Dump, which can read the memory of the Hardlock dongle and save it to a file. You will need to connect the Hardlock dongle to a parallel port or a USB port and run HL-Dump as an administrator. You will also need to select the correct mode (LPT or USB) and press Dump.
If you have a custom USB dongle, you can use a tool like USBTrace, which can capture and analyze the USB traffic between the dongle and the software. You will need to install USBTrace on your computer and run it as an administrator. You will also need to select the correct device (the USB dongle) and start capturing. Then, you will need to run Geovision CCS and perform some actions that require the dongle, such as opening a video stream or changing settings. After that, you will need to stop capturing and save the captured data to a file.
Step 3: Emulate the USB Dongle
The final step is to emulate the USB dongle using a virtual device driver that can load the dumped data and simulate the dongle's behavior. Depending on the type of USB dongle that you have, you may need different tools and methods to do this.
If you have a Hardlock dongle, you can use a tool like MultiKey, which can create a virtual Hardlock device driver that can load the dumped data and emulate the Hardlock dongle. You will need to install MultiKey on your computer and run it as an administrator. You will also need to edit the MultiKey.ini file and enter the correct parameters for your Hardlock dongle, such as serial number, memory address, seed code, etc. Then, you will need to restart your computer and run Geovision CCS without the Hardlock dongle.
If you have a custom USB dongle, you can use a tool like vUSBf, which can create a virtual USB device driver that can load the captured data and emulate the custom USB dongle. You will need to install vUSBf on your computer and run it as an administrator. You will also need to edit the vUSBf.ini file and enter the correct parameters for your custom USB dongle, such as vendor ID, product ID, device class, etc. Then ec8f644aee